Description

THOMPSONS 400 ML STAIN BLOCK AEROSOL
Thompson's Stain Block Aerosol is the quick and easy no mess solution to obliterate unsightly stains preventing them from reappearing. Dry in only 10 minutes, stain block can be used on both walls and ceilings to obliterate the stains.
USAGE AREAS
Suitable for use on interior walls or ceilings, including plaster, cement and stone
COVERAGE
Coverage depends on the texture and porosity of the surface to be sealed and the severity of the staining.
DRY TIMES
Touch dry in 10 minutes
SIZES
400ml aerosol
VOC
Very High

Compatability
Suitable to be overcoated with emulsion paints
Preparation
For maximum adhesion of the coating ensure surfaces are clean, dry and free from any loose materials.
Application
Shake well until mixing ball rattles and continue for one minute. Shake can occasionally during use. Hold can 9"-12" (20-30cm) away from stained area, commence spraying, moving can in a motion from left to right or up and down until the area is covered with an even coat. Allow to dry fully and apply a second coat if required. When completely dry, surfaces can be painted or wallpapered over. To clear nozzle after use invert can and spray for a few seconds.
Clean Up
After use, invert the can and spray for a few seconds to clear the nozzle.